Factory size of Aston Martin Cygnet wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Cygnet models were produced by Aston Martin from 2011 to 2013. There were 1 modifications of this car in total:
The manufacturer Aston Martin installed discs with a diameter of 16 to 17 inches on the Cygnet model. On this model, you can install 12 disk options, of which 3 factory and 9 are valid.
Aston Martin Cygnet: table of standard and permissible disk sizes
The table below shows all the parameters of Aston Martin Cygnet wheels that were produced in 2011-2013.
Legend of the table (parameters of PCD and offset of Aston Martin Cygnet discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.3i AJ10 | 2011 | 5Jx16 4/100 ET40 d54.1 | 16 | 4X100 | 5 | 40 | 54.1 | Factory |
1.3i AJ10 | 2011 | 6Jx16 4/100 ET38 d54.1 | 16 | 4X100 | 6 | 38 | 54.1 | Allowable |
1.3i AJ10 | 2011 | 6Jx17 4/100 ET38 d54.1 | 17 | 4X100 | 6 | 38 | 54.1 | Allowable |
1.3i AJ10 | 2011 | 6.5Jx17 4/100 ET35 d54.1 | 17 | 4X100 | 6.5 | 35 | 54.1 | Allowable |
1.3i AJ10 | 2012 | 5Jx16 4/100 ET40 d54.1 | 16 | 4X100 | 5 | 40 | 54.1 | Factory |
1.3i AJ10 | 2012 | 6Jx16 4/100 ET38 d54.1 | 16 | 4X100 | 6 | 38 | 54.1 | Allowable |
1.3i AJ10 | 2012 | 6Jx17 4/100 ET38 d54.1 | 17 | 4X100 | 6 | 38 | 54.1 | Allowable |
1.3i AJ10 | 2012 | 6.5Jx17 4/100 ET35 d54.1 | 17 | 4X100 | 6.5 | 35 | 54.1 | Allowable |
1.3i AJ10 | 2013 | 5Jx16 4/100 ET40 d54.1 | 16 | 4X100 | 5 | 40 | 54.1 | Factory |
1.3i AJ10 | 2013 | 6Jx16 4/100 ET38 d54.1 | 16 | 4X100 | 6 | 38 | 54.1 | Allowable |
1.3i AJ10 | 2013 | 6Jx17 4/100 ET38 d54.1 | 17 | 4X100 | 6 | 38 | 54.1 | Allowable |
1.3i AJ10 | 2013 | 6.5Jx17 4/100 ET35 d54.1 | 17 | 4X100 | 6.5 | 35 | 54.1 | Allowable |