Factory size of Buick Rainier wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Rainier models were produced by Buick from 2003 to 2007. There were 2 modifications of this car in total:
The manufacturer Buick installed discs with a diameter of 17 to 17 inches on the Rainier model. On this model, you can install 10 disk options, of which 10 factory and 0 are valid.
Buick Rainier: table of standard and permissible disk sizes
The table below shows all the parameters of Buick Rainier wheels that were produced in 2003-2007.
Legend of the table (parameters of PCD and offset of Buick Rainier discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 4.2 I | 2003 | 7Jx17 6/127 ET50 d78.3 | 17 | 6X127 | 7 | 50 | 78.3 | Factory |
| 5.3 I | 2003 | 7Jx17 6/127 ET50 d78.3 | 17 | 6X127 | 7 | 50 | 78.3 | Factory |
| 4.2 I | 2004 | 7Jx17 6/127 ET50 d78.3 | 17 | 6X127 | 7 | 50 | 78.3 | Factory |
| 5.3 I | 2004 | 7Jx17 6/127 ET50 d78.3 | 17 | 6X127 | 7 | 50 | 78.3 | Factory |
| 4.2 I | 2005 | 7Jx17 6/127 ET50 d78.3 | 17 | 6X127 | 7 | 50 | 78.3 | Factory |
| 5.3 I | 2005 | 7Jx17 6/127 ET50 d78.3 | 17 | 6X127 | 7 | 50 | 78.3 | Factory |
| 4.2 I | 2006 | 7Jx17 6/127 ET50 d78.3 | 17 | 6X127 | 7 | 50 | 78.3 | Factory |
| 5.3 I | 2006 | 7Jx17 6/127 ET50 d78.3 | 17 | 6X127 | 7 | 50 | 78.3 | Factory |
| 4.2 I | 2007 | 7Jx17 6/127 ET50 d78.3 | 17 | 6X127 | 7 | 50 | 78.3 | Factory |
| 5.3 I | 2007 | 7Jx17 6/127 ET50 d78.3 | 17 | 6X127 | 7 | 50 | 78.3 | Factory |