Factory size of Buick Wildcat wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Wildcat models were produced by Buick from 1965 to 1970. There were 2 modifications of this car in total:
The manufacturer Buick installed discs with a diameter of 15 to 15 inches on the Wildcat model. On this model, you can install 12 disk options, of which 0 factory and 12 are valid.
Buick Wildcat: table of standard and permissible disk sizes
The table below shows all the parameters of Buick Wildcat wheels that were produced in 1965-1970.
Legend of the table (parameters of PCD and offset of Buick Wildcat discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
Big-block engine | 1965 | 6.5Jx15 5/127 ET2 d | 15 | 5X127 | 6.5 | 2 | Allowable | |
Small-block engine | 1965 | 6.5Jx15 5/120.65 ET2 d | 15 | 5X120.65 | 6.5 | 2 | Allowable | |
Big-block engine | 1966 | 6.5Jx15 5/127 ET2 d | 15 | 5X127 | 6.5 | 2 | Allowable | |
Small-block engine | 1966 | 6.5Jx15 5/120.65 ET2 d | 15 | 5X120.65 | 6.5 | 2 | Allowable | |
Big-block engine | 1967 | 6.5Jx15 5/127 ET2 d | 15 | 5X127 | 6.5 | 2 | Allowable | |
Small-block engine | 1967 | 6.5Jx15 5/120.65 ET2 d | 15 | 5X120.65 | 6.5 | 2 | Allowable | |
Big-block engine | 1968 | 6.5Jx15 5/127 ET2 d | 15 | 5X127 | 6.5 | 2 | Allowable | |
Small-block engine | 1968 | 6.5Jx15 5/120.65 ET2 d | 15 | 5X120.65 | 6.5 | 2 | Allowable | |
Big-block engine | 1969 | 6.5Jx15 5/127 ET2 d | 15 | 5X127 | 6.5 | 2 | Allowable | |
Small-block engine | 1969 | 6.5Jx15 5/120.65 ET2 d | 15 | 5X120.65 | 6.5 | 2 | Allowable | |
Big-block engine | 1970 | 6.5Jx15 5/127 ET2 d | 15 | 5X127 | 6.5 | 2 | Allowable | |
Small-block engine | 1970 | 6.5Jx15 5/120.65 ET2 d | 15 | 5X120.65 | 6.5 | 2 | Allowable |