Factory size of Chevrolet Monza wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Monza models were produced by Chevrolet from 1991 to 1997. There were 2 modifications of this car in total:
The manufacturer Chevrolet installed discs with a diameter of 13 to 13 inches on the Monza model. On this model, you can install 13 disk options, of which 13 factory and 0 are valid.
Chevrolet Monza: table of standard and permissible disk sizes
The table below shows all the parameters of Chevrolet Monza wheels that were produced in 1991-1997.
Legend of the table (parameters of PCD and offset of Chevrolet Monza discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.8i Facelift | 1991 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
2.0i Facelift | 1991 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
1.8i Facelift | 1992 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
2.0i Facelift | 1992 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
1.8i Facelift | 1993 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
2.0i Facelift | 1993 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
1.8i Facelift | 1994 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
2.0i Facelift | 1994 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
1.8i Facelift | 1995 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
2.0i Facelift | 1995 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
1.8i Facelift | 1996 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
2.0i Facelift | 1996 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |
2.0i Facelift | 1997 | 5Jx13 4/100 ET49 d56.6 | 13 | 4X100 | 5 | 49 | 56.6 | Factory |