Factory size of Dacia Solenza wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Solenza models were produced by Dacia from 2003 to 2005. There were 2 modifications of this car in total:
The manufacturer Dacia installed discs with a diameter of 13 to 14 inches on the Solenza model. On this model, you can install 12 disk options, of which 6 factory and 6 are valid.
Dacia Solenza: table of standard and permissible disk sizes
The table below shows all the parameters of Dacia Solenza wheels that were produced in 2003-2005.
Legend of the table (parameters of PCD and offset of Dacia Solenza discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 1.4i I | 2003 | 5.5Jx13 4/100 ET46 d57.1 | 13 | 4X100 | 5.5 | 46 | 57.1 | Factory |
| 1.4i I | 2003 | 5.5Jx14 4/100 ET43 d57.1 | 14 | 4X100 | 5.5 | 43 | 57.1 | Allowable |
| 1.9 D I | 2003 | 5.5Jx13 4/100 ET46 d57.1 | 13 | 4X100 | 5.5 | 46 | 57.1 | Factory |
| 1.9 D I | 2003 | 5.5Jx14 4/100 ET43 d57.1 | 14 | 4X100 | 5.5 | 43 | 57.1 | Allowable |
| 1.4i I | 2004 | 5.5Jx13 4/100 ET46 d57.1 | 13 | 4X100 | 5.5 | 46 | 57.1 | Factory |
| 1.4i I | 2004 | 5.5Jx14 4/100 ET43 d57.1 | 14 | 4X100 | 5.5 | 43 | 57.1 | Allowable |
| 1.9 D I | 2004 | 5.5Jx13 4/100 ET46 d57.1 | 13 | 4X100 | 5.5 | 46 | 57.1 | Factory |
| 1.9 D I | 2004 | 5.5Jx14 4/100 ET43 d57.1 | 14 | 4X100 | 5.5 | 43 | 57.1 | Allowable |
| 1.4i I | 2005 | 5.5Jx13 4/100 ET46 d57.1 | 13 | 4X100 | 5.5 | 46 | 57.1 | Factory |
| 1.4i I | 2005 | 5.5Jx14 4/100 ET43 d57.1 | 14 | 4X100 | 5.5 | 43 | 57.1 | Allowable |
| 1.9 D I | 2005 | 5.5Jx13 4/100 ET46 d57.1 | 13 | 4X100 | 5.5 | 46 | 57.1 | Factory |
| 1.9 D I | 2005 | 5.5Jx14 4/100 ET43 d57.1 | 14 | 4X100 | 5.5 | 43 | 57.1 | Allowable |