Factory size of Dodge Ram SRT wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Ram SRT models were produced by Dodge from 2004 to 2006. There were 1 modifications of this car in total:
The manufacturer Dodge installed discs with a diameter of 20 to 22 inches on the Ram SRT model. On this model, you can install 12 disk options, of which 6 factory and 6 are valid.
Dodge Ram SRT: table of standard and permissible disk sizes
The table below shows all the parameters of Dodge Ram SRT wheels that were produced in 2004-2006.
Legend of the table (parameters of PCD and offset of Dodge Ram SRT discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
8.3i DRDH | 2004 | 9Jx20 5/139.7 ET25.4 d77.8 | 20 | 5X139.7 | 9 | 25.4 | 77.8 | Factory |
8.3i DRDH | 2004 | 10Jx22 5/139.7 ET25.4 d77.8 | 22 | 5X139.7 | 10 | 25.4 | 77.8 | Factory |
8.3i DRDH | 2004 | 9Jx21 5/139.7 ET20 d77.8 | 21 | 5X139.7 | 9 | 20 | 77.8 | Allowable |
8.3i DRDH | 2004 | 11Jx22 5/139.7 ET10 d77.8 | 22 | 5X139.7 | 11 | 10 | 77.8 | Allowable |
8.3i DRDH | 2005 | 9Jx20 5/139.7 ET25.4 d77.8 | 20 | 5X139.7 | 9 | 25.4 | 77.8 | Factory |
8.3i DRDH | 2005 | 10Jx22 5/139.7 ET25.4 d77.8 | 22 | 5X139.7 | 10 | 25.4 | 77.8 | Factory |
8.3i DRDH | 2005 | 9Jx21 5/139.7 ET20 d77.8 | 21 | 5X139.7 | 9 | 20 | 77.8 | Allowable |
8.3i DRDH | 2005 | 11Jx22 5/139.7 ET10 d77.8 | 22 | 5X139.7 | 11 | 10 | 77.8 | Allowable |
8.3i DRDH | 2006 | 9Jx20 5/139.7 ET25.4 d77.8 | 20 | 5X139.7 | 9 | 25.4 | 77.8 | Factory |
8.3i DRDH | 2006 | 10Jx22 5/139.7 ET25.4 d77.8 | 22 | 5X139.7 | 10 | 25.4 | 77.8 | Factory |
8.3i DRDH | 2006 | 9Jx21 5/139.7 ET20 d77.8 | 21 | 5X139.7 | 9 | 20 | 77.8 | Allowable |
8.3i DRDH | 2006 | 11Jx22 5/139.7 ET10 d77.8 | 22 | 5X139.7 | 11 | 10 | 77.8 | Allowable |