Factory size of Dongfeng H30 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23H30 models were produced by Dongfeng from 2011 to 2017. There were 1 modifications of this car in total:
The manufacturer Dongfeng installed discs with a diameter of 16 to 16 inches on the H30 model. On this model, you can install 7 disk options, of which 7 factory and 0 are valid.
Dongfeng H30: table of standard and permissible disk sizes
The table below shows all the parameters of Dongfeng H30 wheels that were produced in 2011-2017.
Legend of the table (parameters of PCD and offset of Dongfeng H30 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.6 | 2011 | 6.5Jx16 4/108 ET42 d66.6 | 16 | 4X108 | 6.5 | 42 | 66.6 | Factory |
1.6 | 2012 | 6.5Jx16 4/108 ET42 d66.6 | 16 | 4X108 | 6.5 | 42 | 66.6 | Factory |
1.6 | 2013 | 6.5Jx16 4/108 ET42 d66.6 | 16 | 4X108 | 6.5 | 42 | 66.6 | Factory |
1.6 | 2014 | 6.5Jx16 4/108 ET42 d66.6 | 16 | 4X108 | 6.5 | 42 | 66.6 | Factory |
1.6 | 2015 | 6.5Jx16 4/108 ET42 d66.6 | 16 | 4X108 | 6.5 | 42 | 66.6 | Factory |
1.6 | 2016 | 6.5Jx16 4/108 ET42 d66.6 | 16 | 4X108 | 6.5 | 42 | 66.6 | Factory |
1.6 | 2017 | 6.5Jx16 4/108 ET42 d66.6 | 16 | 4X108 | 6.5 | 42 | 66.6 | Factory |