Factory size of Dongfeng U-Vane wheels and tolerances
Information updated on Jun. 12, 2022, 11:23U-Vane models were produced by Dongfeng from 2012 to 2016. There were 2 modifications of this car in total:
The manufacturer Dongfeng installed discs with a diameter of 16 to 16 inches on the U-Vane model. On this model, you can install 8 disk options, of which 8 factory and 0 are valid.
Dongfeng U-Vane: table of standard and permissible disk sizes
The table below shows all the parameters of Dongfeng U-Vane wheels that were produced in 2012-2016.
Legend of the table (parameters of PCD and offset of Dongfeng U-Vane discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 3.0T | 2012 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 3.0T | 2013 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 2.5T | 2014 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 3.0T | 2014 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 2.5T | 2015 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 3.0T | 2015 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 2.5T | 2016 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 3.0T | 2016 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |