Factory size of FAW Xenia S80 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Xenia S80 models were produced by FAW from 2011 to 2015. There were 2 modifications of this car in total:
The manufacturer FAW installed discs with a diameter of 15 to 15 inches on the Xenia S80 model. On this model, you can install 7 disk options, of which 7 factory and 0 are valid.
FAW Xenia S80: table of standard and permissible disk sizes
The table below shows all the parameters of FAW Xenia S80 wheels that were produced in 2011-2015.
Legend of the table (parameters of PCD and offset of FAW Xenia S80 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.3i | 2011 | 5.5Jx15 4/114.3 ET40 d60.1 | 15 | 4X114.3 | 5.5 | 40 | 60.1 | Factory |
1.5i | 2011 | 5.5Jx15 4/114.3 ET40 d60.1 | 15 | 4X114.3 | 5.5 | 40 | 60.1 | Factory |
1.5i | 2013 | 5.5Jx15 4/114.3 ET40 d60.1 | 15 | 4X114.3 | 5.5 | 40 | 60.1 | Factory |
1.3i | 2014 | 5.5Jx15 4/114.3 ET40 d60.1 | 15 | 4X114.3 | 5.5 | 40 | 60.1 | Factory |
1.5i | 2014 | 5.5Jx15 4/114.3 ET40 d60.1 | 15 | 4X114.3 | 5.5 | 40 | 60.1 | Factory |
1.3i | 2015 | 5.5Jx15 4/114.3 ET40 d60.1 | 15 | 4X114.3 | 5.5 | 40 | 60.1 | Factory |
1.5i | 2015 | 5.5Jx15 4/114.3 ET40 d60.1 | 15 | 4X114.3 | 5.5 | 40 | 60.1 | Factory |