Factory size of Ferrari F355 Berlinetta wheels and tolerances
Information updated on Jun. 12, 2022, 11:23F355 Berlinetta models were produced by Ferrari from 1994 to 1999. There were 1 modifications of this car in total:
The manufacturer Ferrari installed discs with a diameter of 18 to 18 inches on the F355 Berlinetta model. On this model, you can install 12 disk options, of which 6 factory and 6 are valid.
Ferrari F355 Berlinetta: table of standard and permissible disk sizes
The table below shows all the parameters of Ferrari F355 Berlinetta wheels that were produced in 1994-1999.
Legend of the table (parameters of PCD and offset of Ferrari F355 Berlinetta discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 3.5 | 1994 | 7.5Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 7.5 | 46 | 67.1 | Factory |
| 3.5 | 1994 | 8Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 8 | 46 | 67.1 | Allowable |
| 3.5 | 1995 | 7.5Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 7.5 | 46 | 67.1 | Factory |
| 3.5 | 1995 | 8Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 8 | 46 | 67.1 | Allowable |
| 3.5 | 1996 | 7.5Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 7.5 | 46 | 67.1 | Factory |
| 3.5 | 1996 | 8Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 8 | 46 | 67.1 | Allowable |
| 3.5 | 1997 | 7.5Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 7.5 | 46 | 67.1 | Factory |
| 3.5 | 1997 | 8Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 8 | 46 | 67.1 | Allowable |
| 3.5 | 1998 | 7.5Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 7.5 | 46 | 67.1 | Factory |
| 3.5 | 1998 | 8Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 8 | 46 | 67.1 | Allowable |
| 3.5 | 1999 | 7.5Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 7.5 | 46 | 67.1 | Factory |
| 3.5 | 1999 | 8Jx18 5/108 ET46 d67.1 | 18 | 5X108 | 8 | 46 | 67.1 | Allowable |