Factory size of Fiat Cronos wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Cronos models were produced by Fiat from 2018 to 2019. There were 2 modifications of this car in total:
The manufacturer Fiat installed discs with a diameter of 15 to 17 inches on the Cronos model. On this model, you can install 8 disk options, of which 4 factory and 4 are valid.
Fiat Cronos: table of standard and permissible disk sizes
The table below shows all the parameters of Fiat Cronos wheels that were produced in 2018-2019.
Legend of the table (parameters of PCD and offset of Fiat Cronos discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.3i | 2018 | 6Jx15 4/98 ET40 d58.1 | 15 | 4X98 | 6 | 40 | 58.1 | Factory |
1.8i | 2018 | 6Jx16 4/98 ET42 d58.1 | 16 | 4X98 | 6 | 42 | 58.1 | Factory |
1.8i | 2018 | 6Jx15 4/98 ET40 d58.1 | 15 | 4X98 | 6 | 40 | 58.1 | Allowable |
1.8i | 2018 | 6.5Jx17 4/98 ET44 d58.1 | 17 | 4X98 | 6.5 | 44 | 58.1 | Allowable |
1.3i | 2019 | 6Jx15 4/98 ET40 d58.1 | 15 | 4X98 | 6 | 40 | 58.1 | Factory |
1.8i | 2019 | 6Jx16 4/98 ET42 d58.1 | 16 | 4X98 | 6 | 42 | 58.1 | Factory |
1.8i | 2019 | 6Jx15 4/98 ET40 d58.1 | 15 | 4X98 | 6 | 40 | 58.1 | Allowable |
1.8i | 2019 | 6.5Jx17 4/98 ET44 d58.1 | 17 | 4X98 | 6.5 | 44 | 58.1 | Allowable |