Factory size of Ford Bronco II wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Bronco II models were produced by Ford from 1983 to 1990. There were 2 modifications of this car in total:
The manufacturer Ford installed discs with a diameter of 15 to 15 inches on the Bronco II model. On this model, you can install 8 disk options, of which 0 factory and 8 are valid.
Ford Bronco II: table of standard and permissible disk sizes
The table below shows all the parameters of Ford Bronco II wheels that were produced in 1983-1990.
Legend of the table (parameters of PCD and offset of Ford Bronco II discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| All trims I | 1983 | 6.5Jx15 5/114.3 ET2 d93.1 | 15 | 5X114.3 | 6.5 | 2 | 93.1 | Allowable |
| All trims I | 1984 | 6.5Jx15 5/114.3 ET2 d93.1 | 15 | 5X114.3 | 6.5 | 2 | 93.1 | Allowable |
| All trims I | 1985 | 6.5Jx15 5/114.3 ET2 d93.1 | 15 | 5X114.3 | 6.5 | 2 | 93.1 | Allowable |
| All trims I | 1986 | 6.5Jx15 5/114.3 ET2 d93.1 | 15 | 5X114.3 | 6.5 | 2 | 93.1 | Allowable |
| All trims I | 1987 | 6.5Jx15 5/114.3 ET2 d93.1 | 15 | 5X114.3 | 6.5 | 2 | 93.1 | Allowable |
| All trims II | 1988 | 6.5Jx15 5/114.3 ET2 d93.1 | 15 | 5X114.3 | 6.5 | 2 | 93.1 | Allowable |
| All trims II | 1989 | 6.5Jx15 5/114.3 ET2 d93.1 | 15 | 5X114.3 | 6.5 | 2 | 93.1 | Allowable |
| All trims II | 1990 | 6.5Jx15 5/114.3 ET2 d93.1 | 15 | 5X114.3 | 6.5 | 2 | 93.1 | Allowable |