Factory size of Great Wall Hover H6 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Hover H6 models were produced by Great Wall from 2011 to 2015. There were 5 modifications of this car in total:
The manufacturer Great Wall installed discs with a diameter of 17 to 17 inches on the Hover H6 model. On this model, you can install 11 disk options, of which 11 factory and 0 are valid.
Great Wall Hover H6: table of standard and permissible disk sizes
The table below shows all the parameters of Great Wall Hover H6 wheels that were produced in 2011-2015.
Legend of the table (parameters of PCD and offset of Great Wall Hover H6 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
2.0 | 2011 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |
2.0TD | 2011 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |
1.5T | 2012 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |
2.0TD | 2012 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |
2.4 | 2012 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |
1.5T | 2013 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |
2.4 | 2013 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |
1.5T | 2014 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |
2.0T | 2014 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |
2.4 | 2014 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |
1.5T | 2015 | 6.5Jx17 5/114.3 ET50 d64.1 | 17 | 5X114.3 | 6.5 | 50 | 64.1 | Factory |