Factory size of Honda WR-V wheels and tolerances
Information updated on Jun. 12, 2022, 11:23WR-V models were produced by Honda from 2017 to 2019. There were 3 modifications of this car in total:
The manufacturer Honda installed discs with a diameter of 16 to 16 inches on the WR-V model. On this model, you can install 9 disk options, of which 9 factory and 0 are valid.
Honda WR-V: table of standard and permissible disk sizes
The table below shows all the parameters of Honda WR-V wheels that were produced in 2017-2019.
Legend of the table (parameters of PCD and offset of Honda WR-V discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.2 i-VTEC | 2017 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Factory |
1.5 i-DTEC | 2017 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Factory |
1.5 i-VTEC | 2017 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Factory |
1.2 i-VTEC | 2018 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Factory |
1.5 i-DTEC | 2018 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Factory |
1.5 i-VTEC | 2018 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Factory |
1.2 i-VTEC | 2019 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Factory |
1.5 i-DTEC | 2019 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Factory |
1.5 i-VTEC | 2019 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Factory |