Factory size of LADA Vesta Cross wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Vesta Cross models were produced by LADA from 2018 to 2019. There were 2 modifications of this car in total:
The manufacturer LADA installed discs with a diameter of 17 to 18 inches on the Vesta Cross model. On this model, you can install 12 disk options, of which 4 factory and 8 are valid.
LADA Vesta Cross: table of standard and permissible disk sizes
The table below shows all the parameters of LADA Vesta Cross wheels that were produced in 2018-2019.
Legend of the table (parameters of PCD and offset of LADA Vesta Cross discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 1.6i | 2018 | 6.5Jx17 4/100 ET43 d60.1 | 17 | 4X100 | 6.5 | 43 | 60.1 | Factory |
| 1.6i | 2018 | 7Jx17 4/100 ET45 d60.1 | 17 | 4X100 | 7 | 45 | 60.1 | Allowable |
| 1.6i | 2018 | 7Jx18 4/100 ET40 d60.1 | 18 | 4X100 | 7 | 40 | 60.1 | Allowable |
| 1.8i | 2018 | 6.5Jx17 4/100 ET43 d60.1 | 17 | 4X100 | 6.5 | 43 | 60.1 | Factory |
| 1.8i | 2018 | 7Jx17 4/100 ET45 d60.1 | 17 | 4X100 | 7 | 45 | 60.1 | Allowable |
| 1.8i | 2018 | 7Jx18 4/100 ET40 d60.1 | 18 | 4X100 | 7 | 40 | 60.1 | Allowable |
| 1.6i | 2019 | 6.5Jx17 4/100 ET43 d60.1 | 17 | 4X100 | 6.5 | 43 | 60.1 | Factory |
| 1.6i | 2019 | 7Jx17 4/100 ET45 d60.1 | 17 | 4X100 | 7 | 45 | 60.1 | Allowable |
| 1.6i | 2019 | 7Jx18 4/100 ET40 d60.1 | 18 | 4X100 | 7 | 40 | 60.1 | Allowable |
| 1.8i | 2019 | 6.5Jx17 4/100 ET43 d60.1 | 17 | 4X100 | 6.5 | 43 | 60.1 | Factory |
| 1.8i | 2019 | 7Jx17 4/100 ET45 d60.1 | 17 | 4X100 | 7 | 45 | 60.1 | Allowable |
| 1.8i | 2019 | 7Jx18 4/100 ET40 d60.1 | 18 | 4X100 | 7 | 40 | 60.1 | Allowable |