Factory size of Lancia Monte Carlo wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Monte Carlo models were produced by Lancia from 1980 to 1981. There were 1 modifications of this car in total:
The manufacturer Lancia installed discs with a diameter of 14 to 16 inches on the Monte Carlo model. On this model, you can install 12 disk options, of which 2 factory and 10 are valid.
Lancia Monte Carlo: table of standard and permissible disk sizes
The table below shows all the parameters of Lancia Monte Carlo wheels that were produced in 1980-1981.
Legend of the table (parameters of PCD and offset of Lancia Monte Carlo discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
All trims 137 | 1980 | 7Jx15 4/98 ET25 d58.6 | 15 | 4X98 | 7 | 25 | 58.6 | Factory |
All trims 137 | 1980 | 5.5Jx14 4/98 ET30 d58.6 | 14 | 4X98 | 5.5 | 30 | 58.6 | Allowable |
All trims 137 | 1980 | 6Jx15 4/98 ET30 d58.6 | 15 | 4X98 | 6 | 30 | 58.6 | Allowable |
All trims 137 | 1980 | 6.5Jx15 4/98 ET27 d58.6 | 15 | 4X98 | 6.5 | 27 | 58.6 | Allowable |
All trims 137 | 1980 | 6.5Jx16 4/98 ET27 d58.6 | 16 | 4X98 | 6.5 | 27 | 58.6 | Allowable |
All trims 137 | 1980 | 7.5Jx16 4/98 ET25 d58.6 | 16 | 4X98 | 7.5 | 25 | 58.6 | Allowable |
All trims 137 | 1981 | 7Jx15 4/98 ET25 d58.6 | 15 | 4X98 | 7 | 25 | 58.6 | Factory |
All trims 137 | 1981 | 5.5Jx14 4/98 ET30 d58.6 | 14 | 4X98 | 5.5 | 30 | 58.6 | Allowable |
All trims 137 | 1981 | 6Jx15 4/98 ET30 d58.6 | 15 | 4X98 | 6 | 30 | 58.6 | Allowable |
All trims 137 | 1981 | 6.5Jx15 4/98 ET27 d58.6 | 15 | 4X98 | 6.5 | 27 | 58.6 | Allowable |
All trims 137 | 1981 | 6.5Jx16 4/98 ET27 d58.6 | 16 | 4X98 | 6.5 | 27 | 58.6 | Allowable |
All trims 137 | 1981 | 7.5Jx16 4/98 ET25 d58.6 | 16 | 4X98 | 7.5 | 25 | 58.6 | Allowable |