Factory size of Maserati 3200 GT wheels and tolerances
Information updated on Jun. 12, 2022, 11:233200 GT models were produced by Maserati from 1998 to 2001. There were 1 modifications of this car in total:
The manufacturer Maserati installed discs with a diameter of 18 to 19 inches on the 3200 GT model. On this model, you can install 8 disk options, of which 4 factory and 4 are valid.
Maserati 3200 GT: table of standard and permissible disk sizes
The table below shows all the parameters of Maserati 3200 GT wheels that were produced in 1998-2001.
Legend of the table (parameters of PCD and offset of Maserati 3200 GT discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 3.2i l | 1998 | 8Jx18 5/108 ET55 d67.1 | 18 | 5X108 | 8 | 55 | 67.1 | Factory |
| 3.2i l | 1998 | 8.5Jx19 5/108 ET52 d67.1 | 19 | 5X108 | 8.5 | 52 | 67.1 | Allowable |
| 3.2i l | 1999 | 8Jx18 5/108 ET55 d67.1 | 18 | 5X108 | 8 | 55 | 67.1 | Factory |
| 3.2i l | 1999 | 8.5Jx19 5/108 ET52 d67.1 | 19 | 5X108 | 8.5 | 52 | 67.1 | Allowable |
| 3.2i l | 2000 | 8Jx18 5/108 ET55 d67.1 | 18 | 5X108 | 8 | 55 | 67.1 | Factory |
| 3.2i l | 2000 | 8.5Jx19 5/108 ET52 d67.1 | 19 | 5X108 | 8.5 | 52 | 67.1 | Allowable |
| 3.2i l | 2001 | 8Jx18 5/108 ET55 d67.1 | 18 | 5X108 | 8 | 55 | 67.1 | Factory |
| 3.2i l | 2001 | 8.5Jx19 5/108 ET52 d67.1 | 19 | 5X108 | 8.5 | 52 | 67.1 | Allowable |