Factory size of Opel GT wheels and tolerances
Information updated on Jun. 12, 2022, 11:23GT models were produced by Opel from 2007 to 2009. There were 1 modifications of this car in total:
The manufacturer Opel installed discs with a diameter of 18 to 20 inches on the GT model. On this model, you can install 9 disk options, of which 3 factory and 6 are valid.
Opel GT: table of standard and permissible disk sizes
The table below shows all the parameters of Opel GT wheels that were produced in 2007-2009.
Legend of the table (parameters of PCD and offset of Opel GT discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
2.0T Kappa-Plattform | 2007 | 8Jx18 5/110 ET55 d65.1 | 18 | 5X110 | 8 | 55 | 65.1 | Factory |
2.0T Kappa-Plattform | 2007 | 8.5Jx19 5/110 ET50 d65.1 | 19 | 5X110 | 8.5 | 50 | 65.1 | Allowable |
2.0T Kappa-Plattform | 2007 | 9Jx20 5/110 ET45 d65.1 | 20 | 5X110 | 9 | 45 | 65.1 | Allowable |
2.0T Kappa-Plattform | 2008 | 8Jx18 5/110 ET55 d65.1 | 18 | 5X110 | 8 | 55 | 65.1 | Factory |
2.0T Kappa-Plattform | 2008 | 8.5Jx19 5/110 ET50 d65.1 | 19 | 5X110 | 8.5 | 50 | 65.1 | Allowable |
2.0T Kappa-Plattform | 2008 | 9Jx20 5/110 ET45 d65.1 | 20 | 5X110 | 9 | 45 | 65.1 | Allowable |
2.0T Kappa-Plattform | 2009 | 8Jx18 5/110 ET55 d65.1 | 18 | 5X110 | 8 | 55 | 65.1 | Factory |
2.0T Kappa-Plattform | 2009 | 8.5Jx19 5/110 ET50 d65.1 | 19 | 5X110 | 8.5 | 50 | 65.1 | Allowable |
2.0T Kappa-Plattform | 2009 | 9Jx20 5/110 ET45 d65.1 | 20 | 5X110 | 9 | 45 | 65.1 | Allowable |