Factory size of Pontiac G3 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23G3 models were produced by Pontiac from 2007 to 2010. There were 1 modifications of this car in total:
The manufacturer Pontiac installed discs with a diameter of 14 to 16 inches on the G3 model. On this model, you can install 12 disk options, of which 8 factory and 4 are valid.
Pontiac G3: table of standard and permissible disk sizes
The table below shows all the parameters of Pontiac G3 wheels that were produced in 2007-2010.
Legend of the table (parameters of PCD and offset of Pontiac G3 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 1.6i T250 | 2007 | 5.5Jx14 4/100 ET45 d56.6 | 14 | 4X100 | 5.5 | 45 | 56.6 | Factory |
| 1.6i T250 | 2007 | 6Jx15 4/100 ET45 d56.6 | 15 | 4X100 | 6 | 45 | 56.6 | Factory |
| 1.6i T250 | 2007 | 6.5Jx16 4/100 ET45 d56.6 | 16 | 4X100 | 6.5 | 45 | 56.6 | Allowable |
| 1.6i T250 | 2008 | 5.5Jx14 4/100 ET45 d56.6 | 14 | 4X100 | 5.5 | 45 | 56.6 | Factory |
| 1.6i T250 | 2008 | 6Jx15 4/100 ET45 d56.6 | 15 | 4X100 | 6 | 45 | 56.6 | Factory |
| 1.6i T250 | 2008 | 6.5Jx16 4/100 ET45 d56.6 | 16 | 4X100 | 6.5 | 45 | 56.6 | Allowable |
| 1.6i T250 | 2009 | 5.5Jx14 4/100 ET45 d56.6 | 14 | 4X100 | 5.5 | 45 | 56.6 | Factory |
| 1.6i T250 | 2009 | 6Jx15 4/100 ET45 d56.6 | 15 | 4X100 | 6 | 45 | 56.6 | Factory |
| 1.6i T250 | 2009 | 6.5Jx16 4/100 ET45 d56.6 | 16 | 4X100 | 6.5 | 45 | 56.6 | Allowable |
| 1.6i T250 | 2010 | 5.5Jx14 4/100 ET45 d56.6 | 14 | 4X100 | 5.5 | 45 | 56.6 | Factory |
| 1.6i T250 | 2010 | 6Jx15 4/100 ET45 d56.6 | 15 | 4X100 | 6 | 45 | 56.6 | Factory |
| 1.6i T250 | 2010 | 6.5Jx16 4/100 ET45 d56.6 | 16 | 4X100 | 6.5 | 45 | 56.6 | Allowable |