Factory size of Suzuki Alto C wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Alto C models were produced by Suzuki from 1999 to 2000. There were 1 modifications of this car in total:
The manufacturer Suzuki installed discs with a diameter of 13 to 14 inches on the Alto C model. On this model, you can install 6 disk options, of which 2 factory and 4 are valid.
Suzuki Alto C: table of standard and permissible disk sizes
The table below shows all the parameters of Suzuki Alto C wheels that were produced in 1999-2000.
Legend of the table (parameters of PCD and offset of Suzuki Alto C discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
660i (GF-HA12S) HA12 | 1999 | 4Jx13 4/100 ET45 d54.1 | 13 | 4X100 | 4 | 45 | 54.1 | Factory |
660i (GF-HA12S) HA12 | 1999 | 4.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 4.5 | 45 | 54.1 | Allowable |
660i (GF-HA12S) HA12 | 1999 | 5Jx14 4/100 ET50 d54.1 | 14 | 4X100 | 5 | 50 | 54.1 | Allowable |
660i (GF-HA12S) HA12 | 2000 | 4Jx13 4/100 ET45 d54.1 | 13 | 4X100 | 4 | 45 | 54.1 | Factory |
660i (GF-HA12S) HA12 | 2000 | 4.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 4.5 | 45 | 54.1 | Allowable |
660i (GF-HA12S) HA12 | 2000 | 5Jx14 4/100 ET50 d54.1 | 14 | 4X100 | 5 | 50 | 54.1 | Allowable |