Factory size of Suzuki Alto Eco wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Alto Eco models were produced by Suzuki from 2011 to 2014. There were 1 modifications of this car in total:
The manufacturer Suzuki installed discs with a diameter of 13 to 15 inches on the Alto Eco model. On this model, you can install 12 disk options, of which 8 factory and 4 are valid.
Suzuki Alto Eco: table of standard and permissible disk sizes
The table below shows all the parameters of Suzuki Alto Eco wheels that were produced in 2011-2014.
Legend of the table (parameters of PCD and offset of Suzuki Alto Eco discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 660i (DBA-HA35S) HA35 | 2011 | 4Jx13 4/100 ET45 d54.1 | 13 | 4X100 | 4 | 45 | 54.1 | Factory |
| 660i (DBA-HA35S) HA35 | 2011 | 4.5Jx14 4/100 ET50 d54.1 | 14 | 4X100 | 4.5 | 50 | 54.1 | Factory |
| 660i (DBA-HA35S) HA35 | 2011 | 4.5Jx15 4/100 ET50 d54.1 | 15 | 4X100 | 4.5 | 50 | 54.1 | Allowable |
| 660i (DBA-HA35S) HA35 | 2012 | 4Jx13 4/100 ET45 d54.1 | 13 | 4X100 | 4 | 45 | 54.1 | Factory |
| 660i (DBA-HA35S) HA35 | 2012 | 4.5Jx14 4/100 ET50 d54.1 | 14 | 4X100 | 4.5 | 50 | 54.1 | Factory |
| 660i (DBA-HA35S) HA35 | 2012 | 4.5Jx15 4/100 ET50 d54.1 | 15 | 4X100 | 4.5 | 50 | 54.1 | Allowable |
| 660i (DBA-HA35S) HA35 | 2013 | 4Jx13 4/100 ET45 d54.1 | 13 | 4X100 | 4 | 45 | 54.1 | Factory |
| 660i (DBA-HA35S) HA35 | 2013 | 4.5Jx14 4/100 ET50 d54.1 | 14 | 4X100 | 4.5 | 50 | 54.1 | Factory |
| 660i (DBA-HA35S) HA35 | 2013 | 4.5Jx15 4/100 ET50 d54.1 | 15 | 4X100 | 4.5 | 50 | 54.1 | Allowable |
| 660i (DBA-HA35S) HA35 | 2014 | 4Jx13 4/100 ET45 d54.1 | 13 | 4X100 | 4 | 45 | 54.1 | Factory |
| 660i (DBA-HA35S) HA35 | 2014 | 4.5Jx14 4/100 ET50 d54.1 | 14 | 4X100 | 4.5 | 50 | 54.1 | Factory |
| 660i (DBA-HA35S) HA35 | 2014 | 4.5Jx15 4/100 ET50 d54.1 | 15 | 4X100 | 4.5 | 50 | 54.1 | Allowable |