Factory size of Suzuki Cara wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Cara models were produced by Suzuki from 1993 to 1995. There were 1 modifications of this car in total:
The manufacturer Suzuki installed discs with a diameter of 13 to 14 inches on the Cara model. On this model, you can install 6 disk options, of which 3 factory and 3 are valid.
Suzuki Cara: table of standard and permissible disk sizes
The table below shows all the parameters of Suzuki Cara wheels that were produced in 1993-1995.
Legend of the table (parameters of PCD and offset of Suzuki Cara discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
660i (E-PG6SS) PG | 1993 | 4Jx13 4/100 ET45 d54.1 | 13 | 4X100 | 4 | 45 | 54.1 | Factory |
660i (E-PG6SS) PG | 1993 | 4.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 4.5 | 45 | 54.1 | Allowable |
660i (E-PG6SS) PG | 1994 | 4Jx13 4/100 ET45 d54.1 | 13 | 4X100 | 4 | 45 | 54.1 | Factory |
660i (E-PG6SS) PG | 1994 | 4.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 4.5 | 45 | 54.1 | Allowable |
660i (E-PG6SS) PG | 1995 | 4Jx13 4/100 ET45 d54.1 | 13 | 4X100 | 4 | 45 | 54.1 | Factory |
660i (E-PG6SS) PG | 1995 | 4.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 4.5 | 45 | 54.1 | Allowable |