Factory size of Toyota Paseo wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Paseo models were produced by Toyota from 1992 to 1999. There were 2 modifications of this car in total:
The manufacturer Toyota installed discs with a diameter of 14 to 14 inches on the Paseo model. On this model, you can install 9 disk options, of which 9 factory and 0 are valid.
Toyota Paseo: table of standard and permissible disk sizes
The table below shows all the parameters of Toyota Paseo wheels that were produced in 1992-1999.
Legend of the table (parameters of PCD and offset of Toyota Paseo discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.5 I | 1992 | 5.5Jx14 4/100 ET39 d54.1 | 14 | 4X100 | 5.5 | 39 | 54.1 | Factory |
1.5 I | 1993 | 5.5Jx14 4/100 ET39 d54.1 | 14 | 4X100 | 5.5 | 39 | 54.1 | Factory |
1.5 I | 1994 | 5.5Jx14 4/100 ET39 d54.1 | 14 | 4X100 | 5.5 | 39 | 54.1 | Factory |
1.5 I | 1995 | 5.5Jx14 4/100 ET39 d54.1 | 14 | 4X100 | 5.5 | 39 | 54.1 | Factory |
1.5 II | 1995 | 5.5Jx14 4/100 ET39 d54.1 | 14 | 4X100 | 5.5 | 39 | 54.1 | Factory |
1.5 II | 1996 | 5.5Jx14 4/100 ET39 d54.1 | 14 | 4X100 | 5.5 | 39 | 54.1 | Factory |
1.5 II | 1997 | 5.5Jx14 4/100 ET39 d54.1 | 14 | 4X100 | 5.5 | 39 | 54.1 | Factory |
1.5 II | 1998 | 5.5Jx14 4/100 ET39 d54.1 | 14 | 4X100 | 5.5 | 39 | 54.1 | Factory |
1.5 II | 1999 | 5.5Jx14 4/100 ET39 d54.1 | 14 | 4X100 | 5.5 | 39 | 54.1 | Factory |