Factory size of Acura CL Type-S wheels and tolerances
Information updated on Jun. 12, 2022, 11:23CL Type-S models were produced by Acura from 2001 to 2003. There were 1 modifications of this car in total:
The manufacturer Acura installed discs with a diameter of 17 to 18 inches on the CL Type-S model. On this model, you can install 9 disk options, of which 3 factory and 6 are valid.
Acura CL Type-S: table of standard and permissible disk sizes
The table below shows all the parameters of Acura CL Type-S wheels that were produced in 2001-2003.
Legend of the table (parameters of PCD and offset of Acura CL Type-S discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
3.2i YA4 | 2001 | 7Jx17 5/114.3 ET55 d64.1 | 17 | 5X114.3 | 7 | 55 | 64.1 | Factory |
3.2i YA4 | 2001 | 7.5Jx18 5/114.3 ET50 d64.1 | 18 | 5X114.3 | 7.5 | 50 | 64.1 | Allowable |
3.2i YA4 | 2001 | 8Jx18 5/114.3 ET50 d64.1 | 18 | 5X114.3 | 8 | 50 | 64.1 | Allowable |
3.2i YA4 | 2002 | 7Jx17 5/114.3 ET55 d64.1 | 17 | 5X114.3 | 7 | 55 | 64.1 | Factory |
3.2i YA4 | 2002 | 7.5Jx18 5/114.3 ET50 d64.1 | 18 | 5X114.3 | 7.5 | 50 | 64.1 | Allowable |
3.2i YA4 | 2002 | 8Jx18 5/114.3 ET50 d64.1 | 18 | 5X114.3 | 8 | 50 | 64.1 | Allowable |
3.2i YA4 | 2003 | 7Jx17 5/114.3 ET55 d64.1 | 17 | 5X114.3 | 7 | 55 | 64.1 | Factory |
3.2i YA4 | 2003 | 7.5Jx18 5/114.3 ET50 d64.1 | 18 | 5X114.3 | 7.5 | 50 | 64.1 | Allowable |
3.2i YA4 | 2003 | 8Jx18 5/114.3 ET50 d64.1 | 18 | 5X114.3 | 8 | 50 | 64.1 | Allowable |