Factory size of Alfa Romeo SZ wheels and tolerances
Information updated on Jun. 12, 2022, 11:23SZ models were produced by Alfa Romeo from 1988 to 1994. There were 1 modifications of this car in total:
The manufacturer Alfa Romeo installed discs with a diameter of 16 to 17 inches on the SZ model. On this model, you can install 14 disk options, of which 7 factory and 7 are valid.
Alfa Romeo SZ: table of standard and permissible disk sizes
The table below shows all the parameters of Alfa Romeo SZ wheels that were produced in 1988-1994.
Legend of the table (parameters of PCD and offset of Alfa Romeo SZ discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
3.0i ES30 | 1988 | 7Jx16 5/98 ET7 d58.6 | 16 | 5X98 | 7 | 7 | 58.6 | Factory |
3.0i ES30 | 1988 | 7Jx17 5/98 ET7 d58.6 | 17 | 5X98 | 7 | 7 | 58.6 | Allowable |
3.0i ES30 | 1989 | 7Jx16 5/98 ET7 d58.6 | 16 | 5X98 | 7 | 7 | 58.6 | Factory |
3.0i ES30 | 1989 | 7Jx17 5/98 ET7 d58.6 | 17 | 5X98 | 7 | 7 | 58.6 | Allowable |
3.0i ES30 | 1990 | 7Jx16 5/98 ET7 d58.6 | 16 | 5X98 | 7 | 7 | 58.6 | Factory |
3.0i ES30 | 1990 | 7Jx17 5/98 ET7 d58.6 | 17 | 5X98 | 7 | 7 | 58.6 | Allowable |
3.0i ES30 | 1991 | 7Jx16 5/98 ET7 d58.6 | 16 | 5X98 | 7 | 7 | 58.6 | Factory |
3.0i ES30 | 1991 | 7Jx17 5/98 ET7 d58.6 | 17 | 5X98 | 7 | 7 | 58.6 | Allowable |
3.0i ES30 | 1992 | 7Jx16 5/98 ET7 d58.6 | 16 | 5X98 | 7 | 7 | 58.6 | Factory |
3.0i ES30 | 1992 | 7Jx17 5/98 ET7 d58.6 | 17 | 5X98 | 7 | 7 | 58.6 | Allowable |
3.0i ES30 | 1993 | 7Jx16 5/98 ET7 d58.6 | 16 | 5X98 | 7 | 7 | 58.6 | Factory |
3.0i ES30 | 1993 | 7Jx17 5/98 ET7 d58.6 | 17 | 5X98 | 7 | 7 | 58.6 | Allowable |
3.0i ES30 | 1994 | 7Jx16 5/98 ET7 d58.6 | 16 | 5X98 | 7 | 7 | 58.6 | Factory |
3.0i ES30 | 1994 | 7Jx17 5/98 ET7 d58.6 | 17 | 5X98 | 7 | 7 | 58.6 | Allowable |