Factory size of Buick Roadmaster wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Roadmaster models were produced by Buick from 1991 to 1996. There were 1 modifications of this car in total:
The manufacturer Buick installed discs with a diameter of 15 to 15 inches on the Roadmaster model. On this model, you can install 12 disk options, of which 0 factory and 12 are valid.
Buick Roadmaster: table of standard and permissible disk sizes
The table below shows all the parameters of Buick Roadmaster wheels that were produced in 1991-1996.
Legend of the table (parameters of PCD and offset of Buick Roadmaster discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| All trims | 1991 | 7Jx15 5/127 ET1 d | 15 | 5X127 | 7 | 1 | Allowable | |
| All trims | 1991 | 7.5Jx15 5/127 ET1 d | 15 | 5X127 | 7.5 | 1 | Allowable | |
| All trims | 1992 | 7Jx15 5/127 ET1 d | 15 | 5X127 | 7 | 1 | Allowable | |
| All trims | 1992 | 7.5Jx15 5/127 ET1 d | 15 | 5X127 | 7.5 | 1 | Allowable | |
| All trims | 1993 | 7Jx15 5/127 ET1 d | 15 | 5X127 | 7 | 1 | Allowable | |
| All trims | 1993 | 7.5Jx15 5/127 ET1 d | 15 | 5X127 | 7.5 | 1 | Allowable | |
| All trims | 1994 | 7Jx15 5/127 ET1 d | 15 | 5X127 | 7 | 1 | Allowable | |
| All trims | 1994 | 7.5Jx15 5/127 ET1 d | 15 | 5X127 | 7.5 | 1 | Allowable | |
| All trims | 1995 | 7Jx15 5/127 ET1 d | 15 | 5X127 | 7 | 1 | Allowable | |
| All trims | 1995 | 7.5Jx15 5/127 ET1 d | 15 | 5X127 | 7.5 | 1 | Allowable | |
| All trims | 1996 | 7Jx15 5/127 ET1 d | 15 | 5X127 | 7 | 1 | Allowable | |
| All trims | 1996 | 7.5Jx15 5/127 ET1 d | 15 | 5X127 | 7.5 | 1 | Allowable |