Factory size of BYD F3R wheels and tolerances
Information updated on Jun. 12, 2022, 11:23F3R models were produced by BYD from 2007 to 2011. There were 2 modifications of this car in total:
The manufacturer BYD installed discs with a diameter of 15 to 15 inches on the F3R model. On this model, you can install 7 disk options, of which 7 factory and 0 are valid.
BYD F3R: table of standard and permissible disk sizes
The table below shows all the parameters of BYD F3R wheels that were produced in 2007-2011.
Legend of the table (parameters of PCD and offset of BYD F3R discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.5i | 2007 | 6Jx15 4/100 ET43 d54.1 | 15 | 4X100 | 6 | 43 | 54.1 | Factory |
1.5i | 2008 | 6Jx15 4/100 ET43 d54.1 | 15 | 4X100 | 6 | 43 | 54.1 | Factory |
1.6i | 2008 | 6Jx15 4/100 ET43 d54.1 | 15 | 4X100 | 6 | 43 | 54.1 | Factory |
1.5i | 2009 | 6Jx15 4/100 ET43 d54.1 | 15 | 4X100 | 6 | 43 | 54.1 | Factory |
1.6i | 2009 | 6Jx15 4/100 ET43 d54.1 | 15 | 4X100 | 6 | 43 | 54.1 | Factory |
1.5i | 2011 | 6Jx15 4/100 ET43 d54.1 | 15 | 4X100 | 6 | 43 | 54.1 | Factory |
1.6i | 2011 | 6Jx15 4/100 ET43 d54.1 | 15 | 4X100 | 6 | 43 | 54.1 | Factory |