Factory size of Daihatsu Sigra wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Sigra models were produced by Daihatsu from 2016 to 2019. There were 2 modifications of this car in total:
The manufacturer Daihatsu installed discs with a diameter of 14 to 14 inches on the Sigra model. On this model, you can install 8 disk options, of which 4 factory and 4 are valid.
Daihatsu Sigra: table of standard and permissible disk sizes
The table below shows all the parameters of Daihatsu Sigra wheels that were produced in 2016-2019.
Legend of the table (parameters of PCD and offset of Daihatsu Sigra discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.0 VVT-i | 2016 | 5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5 | 40 | 54.1 | Allowable |
1.2 VVT-i | 2016 | 5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5 | 40 | 54.1 | Factory |
1.0 VVT-i | 2017 | 5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5 | 40 | 54.1 | Allowable |
1.2 VVT-i | 2017 | 5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5 | 40 | 54.1 | Factory |
1.0 VVT-i | 2018 | 5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5 | 40 | 54.1 | Allowable |
1.2 VVT-i | 2018 | 5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5 | 40 | 54.1 | Factory |
1.0 VVT-i | 2019 | 5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5 | 40 | 54.1 | Allowable |
1.2 VVT-i | 2019 | 5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5 | 40 | 54.1 | Factory |