Factory size of Dodge Monaco wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Monaco models were produced by Dodge from 1990 to 1993. There were 1 modifications of this car in total:
The manufacturer Dodge installed discs with a diameter of 14 to 16 inches on the Monaco model. On this model, you can install 12 disk options, of which 4 factory and 8 are valid.
Dodge Monaco: table of standard and permissible disk sizes
The table below shows all the parameters of Dodge Monaco wheels that were produced in 1990-1993.
Legend of the table (parameters of PCD and offset of Dodge Monaco discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 3.0i B-body | 1990 | 6Jx14 5/108 ET35 d71.6 | 14 | 5X108 | 6 | 35 | 71.6 | Factory |
| 3.0i B-body | 1990 | 6.5Jx15 5/108 ET37 d71.6 | 15 | 5X108 | 6.5 | 37 | 71.6 | Allowable |
| 3.0i B-body | 1990 | 7Jx16 5/108 ET40 d71.6 | 16 | 5X108 | 7 | 40 | 71.6 | Allowable |
| 3.0i B-body | 1991 | 6Jx14 5/108 ET35 d71.6 | 14 | 5X108 | 6 | 35 | 71.6 | Factory |
| 3.0i B-body | 1991 | 6.5Jx15 5/108 ET37 d71.6 | 15 | 5X108 | 6.5 | 37 | 71.6 | Allowable |
| 3.0i B-body | 1991 | 7Jx16 5/108 ET40 d71.6 | 16 | 5X108 | 7 | 40 | 71.6 | Allowable |
| 3.0i B-body | 1992 | 6Jx14 5/108 ET35 d71.6 | 14 | 5X108 | 6 | 35 | 71.6 | Factory |
| 3.0i B-body | 1992 | 6.5Jx15 5/108 ET37 d71.6 | 15 | 5X108 | 6.5 | 37 | 71.6 | Allowable |
| 3.0i B-body | 1992 | 7Jx16 5/108 ET40 d71.6 | 16 | 5X108 | 7 | 40 | 71.6 | Allowable |
| 3.0i B-body | 1993 | 6Jx14 5/108 ET35 d71.6 | 14 | 5X108 | 6 | 35 | 71.6 | Factory |
| 3.0i B-body | 1993 | 6.5Jx15 5/108 ET37 d71.6 | 15 | 5X108 | 6.5 | 37 | 71.6 | Allowable |
| 3.0i B-body | 1993 | 7Jx16 5/108 ET40 d71.6 | 16 | 5X108 | 7 | 40 | 71.6 | Allowable |