Factory size of MG Ruixing wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Ruixing models were produced by MG from 2016 to 2016. There were 3 modifications of this car in total:
The manufacturer MG installed discs with a diameter of 16 to 18 inches on the Ruixing model. On this model, you can install 12 disk options, of which 3 factory and 9 are valid.
MG Ruixing: table of standard and permissible disk sizes
The table below shows all the parameters of MG Ruixing wheels that were produced in 2016-2016.
Legend of the table (parameters of PCD and offset of MG Ruixing discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 1.4TGi | 2016 | 6.5Jx16 5/100 ET50 d56.1 | 16 | 5X100 | 6.5 | 50 | 56.1 | Factory |
| 1.4TGi | 2016 | 7Jx16 5/100 ET50 d56.1 | 16 | 5X100 | 7 | 50 | 56.1 | Allowable |
| 1.4TGi | 2016 | 7.5Jx17 5/100 ET50 d56.1 | 17 | 5X100 | 7.5 | 50 | 56.1 | Allowable |
| 1.4TGi | 2016 | 8Jx18 5/100 ET47 d56.1 | 18 | 5X100 | 8 | 47 | 56.1 | Allowable |
| 1.5i | 2016 | 6.5Jx16 5/100 ET50 d56.1 | 16 | 5X100 | 6.5 | 50 | 56.1 | Factory |
| 1.5i | 2016 | 6.5Jx17 5/100 ET45 d56.1 | 17 | 5X100 | 6.5 | 45 | 56.1 | Allowable |
| 1.5i | 2016 | 7Jx18 5/100 ET50 d56.1 | 18 | 5X100 | 7 | 50 | 56.1 | Allowable |
| 1.5i | 2016 | 7.5Jx18 5/100 ET50 d56.1 | 18 | 5X100 | 7.5 | 50 | 56.1 | Allowable |
| 1.5TCi | 2016 | 6.5Jx16 5/100 ET50 d56.1 | 16 | 5X100 | 6.5 | 50 | 56.1 | Factory |
| 1.5TCi | 2016 | 7Jx16 5/100 ET50 d56.1 | 16 | 5X100 | 7 | 50 | 56.1 | Allowable |
| 1.5TCi | 2016 | 7.5Jx17 5/100 ET50 d56.1 | 17 | 5X100 | 7.5 | 50 | 56.1 | Allowable |
| 1.5TCi | 2016 | 8Jx18 5/100 ET47 d56.1 | 18 | 5X100 | 8 | 47 | 56.1 | Allowable |