Factory size of Skoda Octavia Classic wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Octavia Classic models were produced by Skoda from 2018 to 2018. There were 1 modifications of this car in total:
The manufacturer Skoda installed discs with a diameter of 15 to 18 inches on the Octavia Classic model. On this model, you can install 4 disk options, of which 2 factory and 2 are valid.
Skoda Octavia Classic: table of standard and permissible disk sizes
The table below shows all the parameters of Skoda Octavia Classic wheels that were produced in 2018-2018.
Legend of the table (parameters of PCD and offset of Skoda Octavia Classic discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 1.6MPi 5E | 2018 | 6Jx15 5/112 ET43 d57.1 | 15 | 5X112 | 6 | 43 | 57.1 | Factory |
| 1.6MPi 5E | 2018 | 6.5Jx16 5/112 ET46 d57.1 | 16 | 5X112 | 6.5 | 46 | 57.1 | Factory |
| 1.6MPi 5E | 2018 | 7Jx17 5/112 ET49 d57.1 | 17 | 5X112 | 7 | 49 | 57.1 | Allowable |
| 1.6MPi 5E | 2018 | 7.5Jx18 5/112 ET51 d57.1 | 18 | 5X112 | 7.5 | 51 | 57.1 | Allowable |