Factory size of Nissan Cedric Cima wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Cedric Cima models were produced by Nissan from 1988 to 1991. There were 2 modifications of this car in total:
The manufacturer Nissan installed discs with a diameter of 15 to 15 inches on the Cedric Cima model. On this model, you can install 11 disk options, of which 11 factory and 0 are valid.
Nissan Cedric Cima: table of standard and permissible disk sizes
The table below shows all the parameters of Nissan Cedric Cima wheels that were produced in 1988-1991.
Legend of the table (parameters of PCD and offset of Nissan Cedric Cima discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
3.0 (FPY31) I (Y31) | 1988 | 6Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6 | 40 | 66 | Factory |
3.0 (FPY31) I (Y31) | 1988 | 6.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6.5 | 40 | 66 | Factory |
3.0 (FPAY31) I (Y31) | 1989 | 6Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6 | 40 | 66 | Factory |
3.0 (FPY31) I (Y31) | 1989 | 6Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6 | 40 | 66 | Factory |
3.0 (FPY31) I (Y31) | 1989 | 6.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6.5 | 40 | 66 | Factory |
3.0 (FPAY31) I (Y31) | 1990 | 6Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6 | 40 | 66 | Factory |
3.0 (FPY31) I (Y31) | 1990 | 6Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6 | 40 | 66 | Factory |
3.0 (FPY31) I (Y31) | 1990 | 6.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6.5 | 40 | 66 | Factory |
3.0 (FPAY31) I (Y31) | 1991 | 6Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6 | 40 | 66 | Factory |
3.0 (FPY31) I (Y31) | 1991 | 6Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6 | 40 | 66 | Factory |
3.0 (FPY31) I (Y31) | 1991 | 6.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 6.5 | 40 | 66 | Factory |