Factory size of Toyota Soluna wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Soluna models were produced by Toyota from 1996 to 2003. There were 1 modifications of this car in total:
The manufacturer Toyota installed discs with a diameter of 13 to 13 inches on the Soluna model. On this model, you can install 8 disk options, of which 8 factory and 0 are valid.
Toyota Soluna: table of standard and permissible disk sizes
The table below shows all the parameters of Toyota Soluna wheels that were produced in 1996-2003.
Legend of the table (parameters of PCD and offset of Toyota Soluna discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 1.5i AL50 | 1996 | 5Jx13 4/100 ET39 d54.1 | 13 | 4X100 | 5 | 39 | 54.1 | Factory |
| 1.5i AL50 | 1997 | 5Jx13 4/100 ET39 d54.1 | 13 | 4X100 | 5 | 39 | 54.1 | Factory |
| 1.5i AL50 | 1998 | 5Jx13 4/100 ET39 d54.1 | 13 | 4X100 | 5 | 39 | 54.1 | Factory |
| 1.5i AL50 | 1999 | 5Jx13 4/100 ET39 d54.1 | 13 | 4X100 | 5 | 39 | 54.1 | Factory |
| 1.5i AL50 | 2000 | 5Jx13 4/100 ET39 d54.1 | 13 | 4X100 | 5 | 39 | 54.1 | Factory |
| 1.5i AL50 | 2001 | 5Jx13 4/100 ET39 d54.1 | 13 | 4X100 | 5 | 39 | 54.1 | Factory |
| 1.5i AL50 | 2002 | 5Jx13 4/100 ET39 d54.1 | 13 | 4X100 | 5 | 39 | 54.1 | Factory |
| 1.5i AL50 | 2003 | 5Jx13 4/100 ET39 d54.1 | 13 | 4X100 | 5 | 39 | 54.1 | Factory |