Factory size of FAW Xenia M80 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Xenia M80 models were produced by FAW from 2009 to 2014. There were 2 modifications of this car in total:
The manufacturer FAW installed discs with a diameter of 14 to 14 inches on the Xenia M80 model. On this model, you can install 12 disk options, of which 12 factory and 0 are valid.
FAW Xenia M80: table of standard and permissible disk sizes
The table below shows all the parameters of FAW Xenia M80 wheels that were produced in 2009-2014.
Legend of the table (parameters of PCD and offset of FAW Xenia M80 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 1.3 | 2009 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.5 | 2009 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.3 | 2010 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.5 | 2010 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.3 | 2011 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.5 | 2011 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.3 | 2012 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.5 | 2012 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.3 | 2013 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.5 | 2013 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.3 | 2014 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |
| 1.5 | 2014 | 5.5Jx14 4/100 ET35 d56.1 | 14 | 4X100 | 5.5 | 35 | 56.1 | Factory |