Factory size of FAW Xiali N3 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Xiali N3 models were produced by FAW from 2004 to 2012. There were 4 modifications of this car in total:
The manufacturer FAW installed discs with a diameter of 13 to 13 inches on the Xiali N3 model. On this model, you can install 9 disk options, of which 9 factory and 0 are valid.
FAW Xiali N3: table of standard and permissible disk sizes
The table below shows all the parameters of FAW Xiali N3 wheels that were produced in 2004-2012.
Legend of the table (parameters of PCD and offset of FAW Xiali N3 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 1.0 | 2004 | 5.5Jx13 4/100 ET42 d57.1 | 13 | 4X100 | 5.5 | 42 | 57.1 | Factory |
| 1.3 | 2004 | 5.5Jx13 4/100 ET42 d57.1 | 13 | 4X100 | 5.5 | 42 | 57.1 | Factory |
| 1.0 | 2005 | 5.5Jx13 4/100 ET42 d57.1 | 13 | 4X100 | 5.5 | 42 | 57.1 | Factory |
| 1.1 | 2005 | 5.5Jx13 4/100 ET42 d57.1 | 13 | 4X100 | 5.5 | 42 | 57.1 | Factory |
| 1.3 | 2005 | 5.5Jx13 4/100 ET42 d57.1 | 13 | 4X100 | 5.5 | 42 | 57.1 | Factory |
| 1.4 | 2005 | 5.5Jx13 4/100 ET42 d57.1 | 13 | 4X100 | 5.5 | 42 | 57.1 | Factory |
| 1.0 | 2008 | 5.5Jx13 4/100 ET42 d57.1 | 13 | 4X100 | 5.5 | 42 | 57.1 | Factory |
| 1.4 | 2008 | 5.5Jx13 4/100 ET42 d57.1 | 13 | 4X100 | 5.5 | 42 | 57.1 | Factory |
| 1.0 | 2012 | 5.5Jx13 4/100 ET42 d57.1 | 13 | 4X100 | 5.5 | 42 | 57.1 | Factory |