Factory size of Mazda AZ-1 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23AZ-1 models were produced by Mazda from 1992 to 1995. There were 1 modifications of this car in total:
The manufacturer Mazda installed discs with a diameter of 13 to 15 inches on the AZ-1 model. On this model, you can install 12 disk options, of which 4 factory and 8 are valid.
Mazda AZ-1: table of standard and permissible disk sizes
The table below shows all the parameters of Mazda AZ-1 wheels that were produced in 1992-1995.
Legend of the table (parameters of PCD and offset of Mazda AZ-1 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
660 (E-PG6SA) PG6 | 1992 | 4Jx13 4/114.3 ET45 d60.1 | 13 | 4X114.3 | 4 | 45 | 60.1 | Factory |
660 (E-PG6SA) PG6 | 1992 | 4.5Jx14 4/114.3 ET50 d60.1 | 14 | 4X114.3 | 4.5 | 50 | 60.1 | Allowable |
660 (E-PG6SA) PG6 | 1992 | 5Jx15 4/114.3 ET45 d60.1 | 15 | 4X114.3 | 5 | 45 | 60.1 | Allowable |
660 (E-PG6SA) PG6 | 1993 | 4Jx13 4/114.3 ET45 d60.1 | 13 | 4X114.3 | 4 | 45 | 60.1 | Factory |
660 (E-PG6SA) PG6 | 1993 | 4.5Jx14 4/114.3 ET50 d60.1 | 14 | 4X114.3 | 4.5 | 50 | 60.1 | Allowable |
660 (E-PG6SA) PG6 | 1993 | 5Jx15 4/114.3 ET45 d60.1 | 15 | 4X114.3 | 5 | 45 | 60.1 | Allowable |
660 (E-PG6SA) PG6 | 1994 | 4Jx13 4/114.3 ET45 d60.1 | 13 | 4X114.3 | 4 | 45 | 60.1 | Factory |
660 (E-PG6SA) PG6 | 1994 | 4.5Jx14 4/114.3 ET50 d60.1 | 14 | 4X114.3 | 4.5 | 50 | 60.1 | Allowable |
660 (E-PG6SA) PG6 | 1994 | 5Jx15 4/114.3 ET45 d60.1 | 15 | 4X114.3 | 5 | 45 | 60.1 | Allowable |
660 (E-PG6SA) PG6 | 1995 | 4Jx13 4/114.3 ET45 d60.1 | 13 | 4X114.3 | 4 | 45 | 60.1 | Factory |
660 (E-PG6SA) PG6 | 1995 | 4.5Jx14 4/114.3 ET50 d60.1 | 14 | 4X114.3 | 4.5 | 50 | 60.1 | Allowable |
660 (E-PG6SA) PG6 | 1995 | 5Jx15 4/114.3 ET45 d60.1 | 15 | 4X114.3 | 5 | 45 | 60.1 | Allowable |