Factory size of Mazda Eunos 100 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Eunos 100 models were produced by Mazda from 1989 to 1991. There were 2 modifications of this car in total:
The manufacturer Mazda installed discs with a diameter of 14 to 15 inches on the Eunos 100 model. On this model, you can install 12 disk options, of which 6 factory and 6 are valid.
Mazda Eunos 100: table of standard and permissible disk sizes
The table below shows all the parameters of Mazda Eunos 100 wheels that were produced in 1989-1991.
Legend of the table (parameters of PCD and offset of Mazda Eunos 100 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.5 (E-BG5PE) BG | 1989 | 5.5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5.5 | 40 | 54.1 | Factory |
1.5 (E-BG5PE) BG | 1989 | 5.5Jx15 4/100 ET40 d54.1 | 15 | 4X100 | 5.5 | 40 | 54.1 | Allowable |
1.8 (E-BG8PE) BG | 1989 | 5.5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5.5 | 40 | 54.1 | Factory |
1.8 (E-BG8PE) BG | 1989 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Allowable |
1.5 (E-BG5PE) BG | 1990 | 5.5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5.5 | 40 | 54.1 | Factory |
1.5 (E-BG5PE) BG | 1990 | 5.5Jx15 4/100 ET40 d54.1 | 15 | 4X100 | 5.5 | 40 | 54.1 | Allowable |
1.8 (E-BG8PE) BG | 1990 | 5.5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5.5 | 40 | 54.1 | Factory |
1.8 (E-BG8PE) BG | 1990 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Allowable |
1.5 (E-BG5PE) BG | 1991 | 5.5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5.5 | 40 | 54.1 | Factory |
1.5 (E-BG5PE) BG | 1991 | 5.5Jx15 4/100 ET40 d54.1 | 15 | 4X100 | 5.5 | 40 | 54.1 | Allowable |
1.8 (E-BG8PE) BG | 1991 | 5.5Jx14 4/100 ET40 d54.1 | 14 | 4X100 | 5.5 | 40 | 54.1 | Factory |
1.8 (E-BG8PE) BG | 1991 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Allowable |