Factory size of Suzuki Reno wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Reno models were produced by Suzuki from 2004 to 2008. There were 1 modifications of this car in total:
The manufacturer Suzuki installed discs with a diameter of 15 to 16 inches on the Reno model. On this model, you can install 10 disk options, of which 5 factory and 5 are valid.
Suzuki Reno: table of standard and permissible disk sizes
The table below shows all the parameters of Suzuki Reno wheels that were produced in 2004-2008.
Legend of the table (parameters of PCD and offset of Suzuki Reno discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
2.0i J200 | 2004 | 6Jx15 4/114.3 ET44 d57.1 | 15 | 4X114.3 | 6 | 44 | 57.1 | Factory |
2.0i J200 | 2004 | 6.5Jx16 4/114.3 ET44 d57.1 | 16 | 4X114.3 | 6.5 | 44 | 57.1 | Allowable |
2.0i J200 | 2005 | 6Jx15 4/114.3 ET44 d57.1 | 15 | 4X114.3 | 6 | 44 | 57.1 | Factory |
2.0i J200 | 2005 | 6.5Jx16 4/114.3 ET44 d57.1 | 16 | 4X114.3 | 6.5 | 44 | 57.1 | Allowable |
2.0i J200 | 2006 | 6Jx15 4/114.3 ET44 d57.1 | 15 | 4X114.3 | 6 | 44 | 57.1 | Factory |
2.0i J200 | 2006 | 6.5Jx16 4/114.3 ET44 d57.1 | 16 | 4X114.3 | 6.5 | 44 | 57.1 | Allowable |
2.0i J200 | 2007 | 6Jx15 4/114.3 ET44 d57.1 | 15 | 4X114.3 | 6 | 44 | 57.1 | Factory |
2.0i J200 | 2007 | 6.5Jx16 4/114.3 ET44 d57.1 | 16 | 4X114.3 | 6.5 | 44 | 57.1 | Allowable |
2.0i J200 | 2008 | 6Jx15 4/114.3 ET44 d57.1 | 15 | 4X114.3 | 6 | 44 | 57.1 | Factory |
2.0i J200 | 2008 | 6.5Jx16 4/114.3 ET44 d57.1 | 16 | 4X114.3 | 6.5 | 44 | 57.1 | Allowable |