Factory size of Dongfeng S30 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23S30 models were produced by Dongfeng from 2013 to 2017. There were 2 modifications of this car in total:
The manufacturer Dongfeng installed discs with a diameter of 15 to 15 inches on the S30 model. On this model, you can install 10 disk options, of which 10 factory and 0 are valid.
Dongfeng S30: table of standard and permissible disk sizes
The table below shows all the parameters of Dongfeng S30 wheels that were produced in 2013-2017.
Legend of the table (parameters of PCD and offset of Dongfeng S30 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.5 | 2013 | 6Jx15 4/108 ET24 d65.1 | 15 | 4X108 | 6 | 24 | 65.1 | Factory |
1.6 | 2013 | 6Jx15 4/108 ET24 d65.1 | 15 | 4X108 | 6 | 24 | 65.1 | Factory |
1.5 | 2014 | 6Jx15 4/108 ET24 d65.1 | 15 | 4X108 | 6 | 24 | 65.1 | Factory |
1.6 | 2014 | 6Jx15 4/108 ET24 d65.1 | 15 | 4X108 | 6 | 24 | 65.1 | Factory |
1.5 | 2015 | 6Jx15 4/108 ET24 d65.1 | 15 | 4X108 | 6 | 24 | 65.1 | Factory |
1.6 | 2015 | 6Jx15 4/108 ET24 d65.1 | 15 | 4X108 | 6 | 24 | 65.1 | Factory |
1.5 | 2016 | 6Jx15 4/108 ET24 d65.1 | 15 | 4X108 | 6 | 24 | 65.1 | Factory |
1.6 | 2016 | 6Jx15 4/108 ET24 d65.1 | 15 | 4X108 | 6 | 24 | 65.1 | Factory |
1.5 | 2017 | 6Jx15 4/108 ET24 d65.1 | 15 | 4X108 | 6 | 24 | 65.1 | Factory |
1.6 | 2017 | 6Jx15 4/108 ET24 d65.1 | 15 | 4X108 | 6 | 24 | 65.1 | Factory |