Factory size of GMC Syclone wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Syclone models were produced by GMC from 1991 to 1992. There were 1 modifications of this car in total:
The manufacturer GMC installed discs with a diameter of 16 to 17 inches on the Syclone model. On this model, you can install 6 disk options, of which 2 factory and 4 are valid.
GMC Syclone: table of standard and permissible disk sizes
The table below shows all the parameters of GMC Syclone wheels that were produced in 1991-1992.
Legend of the table (parameters of PCD and offset of GMC Syclone discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 4.3T GMT300 | 1991 | 8Jx16 5/120.65 ET41 d70.3 | 16 | 5X120.65 | 8 | 41 | 70.3 | Factory |
| 4.3T GMT300 | 1991 | 8.5Jx17 5/120.65 ET45 d70.3 | 17 | 5X120.65 | 8.5 | 45 | 70.3 | Allowable |
| 4.3T GMT300 | 1991 | 8.5Jx17 5/120.65 ET45 d70.3 | 17 | 5X120.65 | 8.5 | 45 | 70.3 | Allowable |
| 4.3T GMT300 | 1992 | 8Jx16 5/120.65 ET41 d70.3 | 16 | 5X120.65 | 8 | 41 | 70.3 | Factory |
| 4.3T GMT300 | 1992 | 8.5Jx17 5/120.65 ET45 d70.3 | 17 | 5X120.65 | 8.5 | 45 | 70.3 | Allowable |
| 4.3T GMT300 | 1992 | 8.5Jx17 5/120.65 ET45 d70.3 | 17 | 5X120.65 | 8.5 | 45 | 70.3 | Allowable |