Auto-tyres Logo

Factory size of Great Wall Phenom wheels and tolerances

Information updated on Jun. 12, 2022, 11:23

Phenom models were produced by Great Wall from 2010 to 2014. There were 2 modifications of this car in total:

The manufacturer Great Wall installed discs with a diameter of 15 to 15 inches on the Phenom model. On this model, you can install 10 disk options, of which 10 factory and 0 are valid.

Great Wall Phenom: table of standard and permissible disk sizes

The table below shows all the parameters of Great Wall Phenom wheels that were produced in 2010-2014.

Legend of the table (parameters of PCD and offset of Great Wall Phenom discs):

  • DIA (hole diameter)
  • LZ (number of holes)
  • PCD (hole circle diameter)
  • ET (disk indent)

Quick jump to the desired modification of Great Wall Phenom:

By year of production:
By modification:
Modification Production year General parameters Wheel diameter PCD Wheel width ET (disk indent) DIA (diameter) Type of install
1.3 2010 6Jx15 4/100 ET40 d54.1 15 4X100 6 40 54.1 Factory
1.5 2010 6Jx15 4/100 ET40 d54.1 15 4X100 6 40 54.1 Factory
1.3 2011 6Jx15 4/100 ET40 d54.1 15 4X100 6 40 54.1 Factory
1.5 2011 6Jx15 4/100 ET40 d54.1 15 4X100 6 40 54.1 Factory
1.3 2012 6Jx15 4/100 ET40 d54.1 15 4X100 6 40 54.1 Factory
1.5 2012 6Jx15 4/100 ET40 d54.1 15 4X100 6 40 54.1 Factory
1.3 2013 6Jx15 4/100 ET40 d54.1 15 4X100 6 40 54.1 Factory
1.5 2013 6Jx15 4/100 ET40 d54.1 15 4X100 6 40 54.1 Factory
1.3 2014 6Jx15 4/100 ET40 d54.1 15 4X100 6 40 54.1 Factory
1.5 2014 6Jx15 4/100 ET40 d54.1 15 4X100 6 40 54.1 Factory

Wheel sizes for other Great Wall models