Factory size of Nissan Lannia wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Lannia models were produced by Nissan from 2016 to 2019. There were 1 modifications of this car in total:
The manufacturer Nissan installed discs with a diameter of 16 to 17 inches on the Lannia model. On this model, you can install 8 disk options, of which 8 factory and 0 are valid.
Nissan Lannia: table of standard and permissible disk sizes
The table below shows all the parameters of Nissan Lannia wheels that were produced in 2016-2019.
Legend of the table (parameters of PCD and offset of Nissan Lannia discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.6i | 2016 | 6.5Jx16 5/114.3 ET45 d66.1 | 16 | 5X114.3 | 6.5 | 45 | 66.1 | Factory |
1.6i | 2016 | 6.5Jx17 5/114.3 ET45 d66.1 | 17 | 5X114.3 | 6.5 | 45 | 66.1 | Factory |
1.6i | 2017 | 6.5Jx16 5/114.3 ET45 d66.1 | 16 | 5X114.3 | 6.5 | 45 | 66.1 | Factory |
1.6i | 2017 | 6.5Jx17 5/114.3 ET45 d66.1 | 17 | 5X114.3 | 6.5 | 45 | 66.1 | Factory |
1.6i | 2018 | 6.5Jx16 5/114.3 ET45 d66.1 | 16 | 5X114.3 | 6.5 | 45 | 66.1 | Factory |
1.6i | 2018 | 6.5Jx17 5/114.3 ET45 d66.1 | 17 | 5X114.3 | 6.5 | 45 | 66.1 | Factory |
1.6i | 2019 | 6.5Jx16 5/114.3 ET45 d66.1 | 16 | 5X114.3 | 6.5 | 45 | 66.1 | Factory |
1.6i | 2019 | 6.5Jx17 5/114.3 ET45 d66.1 | 17 | 5X114.3 | 6.5 | 45 | 66.1 | Factory |