Factory size of Nissan Prairie Liberty wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Prairie Liberty models were produced by Nissan from 1998 to 2001. There were 3 modifications of this car in total:
The manufacturer Nissan installed discs with a diameter of 15 to 15 inches on the Prairie Liberty model. On this model, you can install 11 disk options, of which 11 factory and 0 are valid.
Nissan Prairie Liberty: table of standard and permissible disk sizes
The table below shows all the parameters of Nissan Prairie Liberty wheels that were produced in 1998-2001.
Legend of the table (parameters of PCD and offset of Nissan Prairie Liberty discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
2.0 (PM12) III (M12) | 1998 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |
2.0 (PNM12) III (M12) | 1998 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |
2.0 (PM12) III (M12) | 1999 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |
2.0 (PNM12) III (M12) | 1999 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |
2.0 Turbo (PNM12) III (M12) | 1999 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |
2.0 (PM12) III (M12) | 2000 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |
2.0 (PNM12) III (M12) | 2000 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |
2.0 Turbo (PNM12) III (M12) | 2000 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |
2.0 (PM12) III (M12) | 2001 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |
2.0 (PNM12) III (M12) | 2001 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |
2.0 Turbo (PNM12) III (M12) | 2001 | 5.5Jx15 5/114.3 ET40 d66 | 15 | 5X114.3 | 5.5 | 40 | 66 | Factory |