Factory size of Toyota MR2 Spyder wheels and tolerances
Information updated on Jun. 12, 2022, 11:23MR2 Spyder models were produced by Toyota from 1999 to 2006. There were 2 modifications of this car in total:
The manufacturer Toyota installed discs with a diameter of 15 to 15 inches on the MR2 Spyder model. On this model, you can install 8 disk options, of which 8 factory and 0 are valid.
Toyota MR2 Spyder: table of standard and permissible disk sizes
The table below shows all the parameters of Toyota MR2 Spyder wheels that were produced in 1999-2006.
Legend of the table (parameters of PCD and offset of Toyota MR2 Spyder discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.8i III | 1999 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Factory |
1.8i III | 2000 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Factory |
1.8i III | 2001 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Factory |
1.8i III | 2002 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Factory |
1.8i III Facelift | 2003 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Factory |
1.8i III Facelift | 2004 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Factory |
1.8i III Facelift | 2005 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Factory |
1.8i III Facelift | 2006 | 6Jx15 4/100 ET45 d54.1 | 15 | 4X100 | 6 | 45 | 54.1 | Factory |