Factory size of Toyota WiLL Cypha wheels and tolerances
Information updated on Jun. 12, 2022, 11:23WiLL Cypha models were produced by Toyota from 2002 to 2005. There were 2 modifications of this car in total:
The manufacturer Toyota installed discs with a diameter of 14 to 14 inches on the WiLL Cypha model. On this model, you can install 8 disk options, of which 8 factory and 0 are valid.
Toyota WiLL Cypha: table of standard and permissible disk sizes
The table below shows all the parameters of Toyota WiLL Cypha wheels that were produced in 2002-2005.
Legend of the table (parameters of PCD and offset of Toyota WiLL Cypha discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.3 VVT-i (NCP70) | 2002 | 5.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 5.5 | 45 | 54.1 | Factory |
1.5 VVT-i (NCP75) | 2002 | 5.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 5.5 | 45 | 54.1 | Factory |
1.3 VVT-i (NCP70) | 2003 | 5.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 5.5 | 45 | 54.1 | Factory |
1.5 VVT-i (NCP75) | 2003 | 5.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 5.5 | 45 | 54.1 | Factory |
1.3 VVT-i (NCP70) | 2004 | 5.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 5.5 | 45 | 54.1 | Factory |
1.5 VVT-i (NCP75) | 2004 | 5.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 5.5 | 45 | 54.1 | Factory |
1.3 VVT-i (NCP70) | 2005 | 5.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 5.5 | 45 | 54.1 | Factory |
1.5 VVT-i (NCP75) | 2005 | 5.5Jx14 4/100 ET45 d54.1 | 14 | 4X100 | 5.5 | 45 | 54.1 | Factory |