Factory size of Toyota Zelas wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Zelas models were produced by Toyota from 2011 to 2016. There were 2 modifications of this car in total:
The manufacturer Toyota installed discs with a diameter of 17 to 18 inches on the Zelas model. On this model, you can install 12 disk options, of which 6 factory and 6 are valid.
Toyota Zelas: table of standard and permissible disk sizes
The table below shows all the parameters of Toyota Zelas wheels that were produced in 2011-2016.
Legend of the table (parameters of PCD and offset of Toyota Zelas discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
2.5 VVT-i | 2011 | 7Jx17 5/114.3 ET45 d60.1 | 17 | 5X114.3 | 7 | 45 | 60.1 | Factory |
2.5 VVT-i | 2011 | 7.5Jx18 5/114.3 ET39 d60.1 | 18 | 5X114.3 | 7.5 | 39 | 60.1 | Allowable |
2.5 VVT-i | 2012 | 7Jx17 5/114.3 ET45 d60.1 | 17 | 5X114.3 | 7 | 45 | 60.1 | Factory |
2.5 VVT-i | 2012 | 7.5Jx18 5/114.3 ET39 d60.1 | 18 | 5X114.3 | 7.5 | 39 | 60.1 | Allowable |
2.5 VVT-i | 2013 | 7Jx17 5/114.3 ET45 d60.1 | 17 | 5X114.3 | 7 | 45 | 60.1 | Factory |
2.5 VVT-i | 2013 | 7.5Jx18 5/114.3 ET39 d60.1 | 18 | 5X114.3 | 7.5 | 39 | 60.1 | Allowable |
2.5 VVT-i Facelift | 2014 | 7Jx17 5/114.3 ET45 d60.1 | 17 | 5X114.3 | 7 | 45 | 60.1 | Factory |
2.5 VVT-i Facelift | 2014 | 7.5Jx18 5/114.3 ET39 d60.1 | 18 | 5X114.3 | 7.5 | 39 | 60.1 | Allowable |
2.5 VVT-i Facelift | 2015 | 7Jx17 5/114.3 ET45 d60.1 | 17 | 5X114.3 | 7 | 45 | 60.1 | Factory |
2.5 VVT-i Facelift | 2015 | 7.5Jx18 5/114.3 ET39 d60.1 | 18 | 5X114.3 | 7.5 | 39 | 60.1 | Allowable |
2.5 VVT-i Facelift | 2016 | 7Jx17 5/114.3 ET45 d60.1 | 17 | 5X114.3 | 7 | 45 | 60.1 | Factory |
2.5 VVT-i Facelift | 2016 | 7.5Jx18 5/114.3 ET39 d60.1 | 18 | 5X114.3 | 7.5 | 39 | 60.1 | Allowable |