Factory size of Dongfeng CM7 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23CM7 models were produced by Dongfeng from 2014 to 2018. There were 2 modifications of this car in total:
The manufacturer Dongfeng installed discs with a diameter of 16 to 17 inches on the CM7 model. On this model, you can install 7 disk options, of which 7 factory and 0 are valid.
Dongfeng CM7: table of standard and permissible disk sizes
The table below shows all the parameters of Dongfeng CM7 wheels that were produced in 2014-2018.
Legend of the table (parameters of PCD and offset of Dongfeng CM7 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 2.0 Turbo | 2014 | 7.5Jx17 5/114.3 ET56 d60.1 | 17 | 5X114.3 | 7.5 | 56 | 60.1 | Factory |
| 2.4 | 2014 | 6.5Jx16 5/114.3 ET56 d60.1 | 16 | 5X114.3 | 6.5 | 56 | 60.1 | Factory |
| 2.4 | 2014 | 7.5Jx17 5/114.3 ET56 d60.1 | 17 | 5X114.3 | 7.5 | 56 | 60.1 | Factory |
| 2.0 Turbo | 2015 | 7.5Jx17 5/114.3 ET56 d60.1 | 17 | 5X114.3 | 7.5 | 56 | 60.1 | Factory |
| 2.0 Turbo | 2016 | 7.5Jx17 5/114.3 ET56 d60.1 | 17 | 5X114.3 | 7.5 | 56 | 60.1 | Factory |
| 2.0 Turbo | 2017 | 7.5Jx17 5/114.3 ET56 d60.1 | 17 | 5X114.3 | 7.5 | 56 | 60.1 | Factory |
| 2.0 Turbo | 2018 | 7.5Jx17 5/114.3 ET56 d60.1 | 17 | 5X114.3 | 7.5 | 56 | 60.1 | Factory |