Factory size of Dongfeng V22 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23V22 models were produced by Dongfeng from 2011 to 2013. There were 2 modifications of this car in total:
The manufacturer Dongfeng installed discs with a diameter of 14 to 14 inches on the V22 model. On this model, you can install 6 disk options, of which 6 factory and 0 are valid.
Dongfeng V22: table of standard and permissible disk sizes
The table below shows all the parameters of Dongfeng V22 wheels that were produced in 2011-2013.
Legend of the table (parameters of PCD and offset of Dongfeng V22 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.0 | 2011 | 5.5Jx14 4/100 ET35 d57.1 | 14 | 4X100 | 5.5 | 35 | 57.1 | Factory |
1.3 | 2011 | 5.5Jx14 4/100 ET35 d57.1 | 14 | 4X100 | 5.5 | 35 | 57.1 | Factory |
1.0 | 2012 | 5.5Jx14 4/100 ET35 d57.1 | 14 | 4X100 | 5.5 | 35 | 57.1 | Factory |
1.3 | 2012 | 5.5Jx14 4/100 ET35 d57.1 | 14 | 4X100 | 5.5 | 35 | 57.1 | Factory |
1.0 | 2013 | 5.5Jx14 4/100 ET35 d57.1 | 14 | 4X100 | 5.5 | 35 | 57.1 | Factory |
1.3 | 2013 | 5.5Jx14 4/100 ET35 d57.1 | 14 | 4X100 | 5.5 | 35 | 57.1 | Factory |