Factory size of Dongfeng SX6 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23SX6 models were produced by Dongfeng from 2016 to 2018. There were 3 modifications of this car in total:
The manufacturer Dongfeng installed discs with a diameter of 17 to 17 inches on the SX6 model. On this model, you can install 5 disk options, of which 5 factory and 0 are valid.
Dongfeng SX6: table of standard and permissible disk sizes
The table below shows all the parameters of Dongfeng SX6 wheels that were produced in 2016-2018.
Legend of the table (parameters of PCD and offset of Dongfeng SX6 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.6 | 2016 | 7Jx17 5/114.3 ET49 d60.1 | 17 | 5X114.3 | 7 | 49 | 60.1 | Factory |
2.0 | 2016 | 7Jx17 5/114.3 ET49 d60.1 | 17 | 5X114.3 | 7 | 49 | 60.1 | Factory |
1.3T | 2018 | 7Jx17 5/114.3 ET49 d60.1 | 17 | 5X114.3 | 7 | 49 | 60.1 | Factory |
1.6 | 2018 | 7Jx17 5/114.3 ET49 d60.1 | 17 | 5X114.3 | 7 | 49 | 60.1 | Factory |
2.0 | 2018 | 7Jx17 5/114.3 ET49 d60.1 | 17 | 5X114.3 | 7 | 49 | 60.1 | Factory |