Factory size of Dongfeng Glory 330 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Glory 330 models were produced by Dongfeng from 2014 to 2018. There were 3 modifications of this car in total:
The manufacturer Dongfeng installed discs with a diameter of 14 to 14 inches on the Glory 330 model. On this model, you can install 9 disk options, of which 9 factory and 0 are valid.
Dongfeng Glory 330: table of standard and permissible disk sizes
The table below shows all the parameters of Dongfeng Glory 330 wheels that were produced in 2014-2018.
Legend of the table (parameters of PCD and offset of Dongfeng Glory 330 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.2 | 2014 | 5.5Jx14 4/114.3 ET41 d67.1 | 14 | 4X114.3 | 5.5 | 41 | 67.1 | Factory |
1.3 | 2014 | 5Jx14 4/114.3 ET41.5 d67.1 | 14 | 4X114.3 | 5 | 41.5 | 67.1 | Factory |
1.5 | 2014 | 5.5Jx14 4/114.3 ET41 d67.1 | 14 | 4X114.3 | 5.5 | 41 | 67.1 | Factory |
1.2 | 2015 | 5.5Jx14 4/114.3 ET41 d67.1 | 14 | 4X114.3 | 5.5 | 41 | 67.1 | Factory |
1.5 | 2015 | 5.5Jx14 4/114.3 ET41 d67.1 | 14 | 4X114.3 | 5.5 | 41 | 67.1 | Factory |
1.2 | 2016 | 5.5Jx14 4/114.3 ET41 d67.1 | 14 | 4X114.3 | 5.5 | 41 | 67.1 | Factory |
1.5 | 2016 | 5.5Jx14 4/114.3 ET41 d67.1 | 14 | 4X114.3 | 5.5 | 41 | 67.1 | Factory |
1.5 | 2017 | 5.5Jx14 4/114.3 ET41 d67.1 | 14 | 4X114.3 | 5.5 | 41 | 67.1 | Factory |
1.5 | 2018 | 5.5Jx14 4/114.3 ET41 d67.1 | 14 | 4X114.3 | 5.5 | 41 | 67.1 | Factory |